SPECIFICATION |
H-600 |
H-650 |
H-700 |
H-750 |
TYPE |
V-BELT CONE PULLEY BEARING TYPE |
|||
| Admit Between Center | 1000mm - 10000mm | 1000mm - 10000mm | 1000mm - 10000mm | 1000mm - 10000mm |
| Center Height | 600mm | 650mm | 700mm | 750mm |
| Swing over Bed | 1200mm | 1300mm | 1400mm | 1500mm |
| Swing over Cross Slide | 800mm | 900mm | 1000mm | 1100mm |
| Swing in Gap | 1525mm | 1625mm | 1725mm | 1825mm |
| Width of Bed | 600mm | 650mm | 700mm | 750mm |
| Width of Gap | 300mm | 300mm | 300mm | 300mm |
| Spindle Nose / Bore / Taper | THREADED / 125mm / MT-6 |
THREADED / 125mm / MT-6 |
THREADED / 125mm / MT-6 |
THREADED / 125mm / MT-6 |
| Spindle Speed / Range | 8/20-400rpm | 8/20-400rpm | 8/20-400rpm | 8/20-400rpm |
| Main Motor | 7.5hp | 7.5hp | 7.5hp | 7.5hp |
SPECIFICATION |
H-800 |
H-850 |
H-900 |
H-950 |
| TYPE | V-BELT CONE PULLEY BEARING TYPE |
|||
| Admit Between Center | 1000mm - 10000mm | 1000mm - 10000mm | 1000mm - 10000mm | 1000mm - 10000mm |
| Center Height | 800mm | 850mm | 900mm | 950mm |
| Swing over Bed | 1600mm | 1700mm | 1800mm | 1900mm |
| Swing over Cross Slide | 1200mm | 1300mm | 1400mm | 1500mm |
| Swing in Gap | 1925mm | 2025mm | 2125mm | 2225mm |
| Width of Bed | 800mm | 850mm | 900mm | 950mm |
| Width of Gap | 300mm | 300mm | 300mm | 300mm |
| Spindle Nose / Bore / Taper | THREADED / 125mm / MT-6 |
THREADED / 125mm / MT-6 |
THREADED / 125mm / MT-6 |
THREADED / 125mm / MT-6 |
| Spindle Speed / Range | 8/20-400rpm | 8/20-400rpm | 8/20-400rpm | 8/20-400rpm |
| Main Motor | 7.5hp | 7.5hp | 7.5hp | 7.5hp |
Hardened and ground bed, Hardened & Ground Threaded Spindle Nose, with Change Gears for Metric/Inch Thread, Turcite-B lining in saddle Guideways, complete with Electric Motor and Electricals, Machine is Tested to IS-1878 (Part) 1993.
Standard Accessories
Complete with electrical for 415 volts, 50 cycles, 3ph supply, Carrier Plate, Center Bush, 2Nos. MT Dead Center, Toolpost spanner, thread dial indicator, 4 way tool post and instruction manual with beam packing.
Optional Accessories
| 125 mm Spindle Bore | 150 mm Spindle Bore | Norton Gear Box | Taper Turning Attachment |
| Face plate | 4 Jaw Independent Chuck | Follow Rest PAD Type | Machine Lamp |
| Chuck Plate | 2-Pin Steady Rest BRG. Type | Revolving Center | Coolant Pump |
| 3 Jaw True Chuck | Motorized Apron | Motorized Tailstock |